Rhombus Access Control System
2CH 12V Wireless Remote Control Switch Transmitter&Receiver Access 315MHz
2CH 12V Wireless Remote Control Switch Transmitter&Receiver Access 315MHz
Dostupnost vyzvednutí nebylo možné načíst
Specifications:
- Wireless remote control with one button to open the door.
- Remote control with slide cover and keyring.
- Small and compact size.
- Convenient to operate and easy to use.
- Stable performance and low-power consumption, long service life.
- The wireless signal can pass through walls, floors and doors.
- Used in garage door, roller shutter door or windows, remote control door lock, etc
- Uses fixed coding.
- The output way is adjusted between Jog/inter-lock /self-lock/ Jog and self-lock
Technical Information:
|
Receiver |
|
|
Channels : |
2 Channel |
|
Operating Voltage : |
12 V |
|
Static State Work Current : |
< 6 mA |
|
Received Sensitive : |
-105 dBm |
|
Max. Input Current : |
< 10 A |
|
Operating Frequency : |
315 MHz |
|
Dimensions : |
- approx. 70 (W) x 48 (H) x 28(D) mm |
|
Transmitter (Remote Control) |
|
|
Material : |
Plastic |
|
Color : |
White |
|
Range : |
approx. 10 ~ 25M |
|
Dimension : |
- approx. 55 (W) x 30 (H) x 12 (D) mm |
Working/output way
- Jog: press one button is working . loosen your finger on the same button is stop.
- Self -lock: press one button for one time is working .press the same button again is stop .
- Inter-lock : press one button is working ,press another button is stop .
Wiring Diagram
Choosing the working style?
- Jog: JP1-1 and JP-2 short circut.
- Self-lock: JP1-3 and JP1-4 short circut
- Inter-lock: JP1-1, JP1-2,JP1-3,JP1-4 dont connected to each other
- 1CH Jog and 1CH self-lock: JP1-1 adn JP1-2 short circut, JP1-3 and JP1-4 short circut.
How to pairing code and clear code:
Pairing code:
1. Jog/ self-lock/ 1CH jog and 1CH self-lock: press S1, then release, LED light. Complete the following steps in 6 seconds:
a. Press remote control button A,(will control first CH） LED lights flash two tiems and keep on,
b. press remote control button B（will control second CH,LED ligth flash three times and turn off， OK!
2. Inter-lock:press S1, then release, LED light. Complete the following steps in 6 seconds:
a. Press remote control button A(will control first CH）, LED lights flash two tiems and keep on
b. Press remote control button B（will control second CH）,LED ligth flash three times and keep on
c. Press remote control button C（button C Button C function is close 1CH and 2CH）,OK!
Clear code:
Press S1 and hold until the LED is flashing, then release ,OK!
Note:
Receiver Board is with up to 4 remote control.
Package includes:
|
808M-1 |
808M-2 |
808M-4 |
|
|
|
|
