Rhombus Access Control System
Mini Small TCP/IP One 1 Door 20K Users 100K Events Access Controller+EM Reader
Mini Small TCP/IP One 1 Door 20K Users 100K Events Access Controller+EM Reader
Verfügbarkeit für Abholungen konnte nicht geladen werden
Features：
- Mini size 80*44mm.Designed for intercom/Door phone,suitable to install in an exsiting device or narrow spaces.
- EM4100 ID reader built in.Can extend a standard Wiegand26 RFID reader,that means it can be used for both entry/exit reading.Even can be used for other RFID
applications such as HID/AWID/UHF/Mifare1 etc so long as to extend a reader.
- 20K users and 40K records memory capacity,It has almost the same performance and specifications as a standard TCP/IP access controller.
- Specified design,smaller size, environmentally friendly,energy conservation.
Electrical parameters:
- The power supply voltage: DC12V-DC18V;
- Working temperature: -40 ℃ --+75 ℃;
- Card type: EM4100 card
- Communication interface: TCP/IP;
- Communication line is the longest distance: 100 meters;
- Data transmission speed: 10M;
- The lock output control: stem node output;
- The most support joint outlets: Unlimited
- The card reading distance: more than 50mm;
- Record capacity: 100000 (expandable to 300000)
- Card capacity: 20000 (expandable to 40000);
- Read card time: <0.2S;
- Appearance size: 86*45*15mm;
- Fixed installation hole spacing: 80mm
|
Preferences |
Single Door/Bidirectional Controller |
|
Model |
Mini WG2001.NET |
|
Software Download |
Download the software+Wiring diagram+Software instruction link below: [link removed by eBay] Double click “setup.exe”.Username:ABC,Password:123 Registration code:2004 Extended functions password:5678 |
|
Communications |
TCP/IP 10M/100M Self-adaptive |
|
Description |
One door,Card enter,Card or button exit |
|
PCB Dimensions |
86*45mm |
|
Current |
<100mA |
|
Acceptable Card Readers' Format |
Wiegand 26bit |
|
Extensible Card Readers |
1 |
|
Door(s) for control |
1 |
|
Delay |
1-600 seconds adjustable |
|
Max units online |
Unlimited |
|
Working Temperature |
-40 ~70 Centigrade |
|
Working Moisture |
10-90%RH |
|
Max Users Quantity |
20,000 |
|
Event records quantity |
100,000 |
|
Power off Protection |
High speed flash memory,keep data safe without power |
|
Max Distance from Reader to Controller |
Max to 100M |
|
Max Distance from Controller to PC |
TCP/IP:According to the network coverage |
|
Alarm when:Door un-closed overtime,unlawful entry or being Threatened |
yes |
|
Fire protection &Alarm Trigger |
If theft or fire occurs,the software can alarm by PC's speaker. If the controller contact to "alarm external, module",it can also drive the alarm Siren, |
|
Hold the door open/closed by software |
yes |
|
Remote open by software |
yes |
|
Anti go back convertly,Anti followed |
yes |
|
Note:This function means if a card has already exited,it can not exit again without enter. |
|
|
programmable time of hold open |
yes |
|
Note:can setup the door hold open at a specified time,maybe useful during the period of going to work every morning |
|
|
Electrical Map |
yes |
|
Note:Can easily know your doors' condition vividly from the software. |
|
|
Urgently close Both enter&exit |
yes |
|
Note:The door(s) can be hold closed,refuses both enter and exit in case of theft or other accident occurs. |
|
|
Initial Card |
yes |
|
Note:If Initial Cards was activated,Only after Initial card is read,Other user cards can be available. |
|
|
validate from both side |
yes |
|
Note:Door can be set to openned only when card reading from both outside and inside of the door. |
|
|
Extensible pin code RFID reader |
yes |
|
(card+pin code/super password) |
Note:Door can be set to openned only when both card reading and pin code pressed. |
Software Diagram:
Package:
1 x 1-door access control board
1 x EM Coil
2 x 4 PIN Cable
