RFID Card Hotel Lock Management System /Swiping Smart Induction Lock+Card
RFID Card Hotel Lock Management System /Swiping Smart Induction Lock+Card
Technical Data |
|
Model |
2062-S |
Card Type |
125Khz T5577 card |
Mechanical Key |
2 pcs |
Material |
Stainless Steel |
Finish |
Brushed Steel, PVD,BPVD |
Color |
Black/Silver |
Latch Style |
Mortise |
Backset |
56/70mm |
Deadbolt |
20mm |
Batteries |
4 AA batteries required.(not included) |
Battery duration |
ca 1 year |
Static Current |
≤20μA |
Dynamic Current |
≤200mA |
Working temperature |
-25°C—65°C |
Applicable door range |
30*55mm |
Exterior trim size(L*W*D) |
259.89*70.95*17mm |
Note:
1, Please indicate the use of places, such as hotel , household , office .
2, Such as the family、office, software is not required.
Specifications
RFID Card to open the door:
The unique RFID card reader design provides great convenience for the elder and youngfamily members as well as office staff who have cards already.(It also support the RFID keyfob)
Emergency Key to open the door
If you do not want to use the RFID Card/Remotel control(or keyfob), you can still use the backup mechanical keys included in thepackage to open the lock.
Deadbolt + Anti-card Latch:
It has two Latchs: One is Deadbolt Latch, the other is Anti-card Latch,with these two Latchs, you will make your Home/Office more security.
Handle:
The default version is right handle, we also supply the Left handle version door lock. If you need the Left handle door lock, please contact us.
Back Bolt Knob:
There is a Bolt knob on the back of the lock, when you at indoor, you can twist this bolt knob to make the deadbolt latch out to improve your security.
4x AA Batteries:
It works with 4x AA batteries, you do not need to worry about power off, because if the voltage is less than 4.8v, there will be battery alarm and you still can use it more than 100times before you change the battery.
Note:
- Power supply: DC6V, 4PCS Standard AA Alkaline Battery
- Battery Life: about 1 year, depending on the usage condition.
- Low voltage warning: Voltage less than 4.8v, there will be 3 sounds and the red LED light. The lock still can be unlockedmore than 50 times , before the battery are replaced.
- Operational reliability: 1000 consecutive card operations without accidents.
- Emergency unlocking: The door can be unlocked by Master card OR Mechanical key even though the deadbolt works under mergency situation.
- Installation request: To be installed on the door, with the door thickness between 35mm and 55 mm.
- If the door surface is decorated , the distance between the decoration edge to the door edge must be over 95mm.
Software:
1.The hotel key card lock management software can be run by Win2000,WinXP,Win7&8 computer operating system.
Software download:
username adn passwor is admin
2.The use of Staff Card:
1). Floor Card: Use for opening all locks in a certain floor in a certain building.
2). Building Card: Use for opening all locks in a certain building.
3). Master Card: Use for opening all locks of Lock System.
4). Emergency Card: Use for opening all locks of Lock System and all the locks will remain unlock state.
To disable the opening state, here are two solutions:
A). Press down the handle and swipe the Emergency Card immediately;
B). Use ordinary Cards (Master Card or Floor Card etc.) to open the door one time,the lock will be free from opening state.
5). Group Card: Use for opening the group locks. For details, please refer to “Group Number Setup” in “Door Lock Setup”.
6). Record Card: For MIFARE 1 Lock, its Record Card is S70 Card using for picking up the door-opening record; For TEMIC Lock, its Record Card is T5557 or T5567 Card using as Directing Card which swipe over the Lock Sensor before using Collector to pick up the door-opening record.
7). Loss-Report Card: If the card lose, please input or select Card Number of the lost card to issue the Loss-Report Card. Use it to swipe the Door Lock that the lost card can open.
8). Check-out Card: For server.
Normally, there are two cards taken by servers. One is Floor Card using for opening door.Another is Check-out Card, which is used to disable the unlock function of the previous Guest Card without affecting the one of new Guest Card.
3.Softwares
Schematic diagram of hotel lock management system
Note:
1.If you are buying this for office or home,please get the manual from:https://software.
44af.com/Hoteldoorlock/office&homelock.pdf ,you can get instructions about how to
add/delete a keycard.
2.If you are buying this for a hotel/motel door lock system,Please get software and
instruction ,please contact us.
You need at least 1 programmer and it will be connected to your lobby computer.
You have to tell cards which room is valid and expiration by this device.Also,I DO
suggest you should have at least 2 pcs of programmer in case of defect.
Lobby card Dispenser Writer programm Hotel Motel RFID Doorlock Management System 712182039524 | eBay